Product type | Mantis 90A OPTO HV | |
Model Number | 2090411 | |
Type | brushed/brushless | brushless |
High Voltage / Normal | High Voltage | |
Specifications | Continuous Current | 90A |
Burst Current | 100A | |
Battery Cell | 18-38NC/6-12Lipo | |
BEC output | / | |
Size | Width | 48mm |
Length | 80mm | |
Height | 21mm | |
Weight | 128g | |
Wires & Connectors | Power Wires | 12#AWG,160mm-Red/160mm-Black |
Motor Wires | 12#AWG,65mm-Black | |
Signal Wires | (Brownorange and red)60C,330mm a special JR male plug at one side | |
Signal Wires 2 | (Brownorange and red)30C,150mm a special JR male plug at one side | |
Power plug | no | |
ESC Programing via | Transmitter | yes |
AIR Program Card | ||
LED Program Card | yes | |
LCD Program Card | ||
WiFi Module | ||
USB program connector | ||
Firmware | Firmware Upgrade |
Tone of value Prog.Item |
BEEP- |
BEEP- BEEP- |
BEEP- BEEP-BEEP- |
BEEP- BEEP- BEEP- BEEP- |
BEEP— |
BEEP— BEEP- |
BEEP— BEEP- BEEP- |
BEEP— BEEP- BEEP- BEEP- |
BEEP— BEEP- BEEP- BEEP- BEEP- |
Brake Type | Brake OFF | Soft Brake | Mid Brake | Hard Brake | |||||
Battery Type | NiCd/NiMH | LiPo | LiFe | ||||||
Cut Off Voltage Threshold | 2.8V/50% | 3.0V/60% | 3.2V/65% | No Protection | |||||
Restore Factory Setup Defaults | Restore | ||||||||
Motor Timing | Auto | 2° | 8° | 15° | 22° | 30° | |||
SBEC Voltage Output | 5.0V | 6.0V | 7.4V | 8.4V | |||||
Governor Mode | RPM OFF | 1st Soft Start | 2nd Soft Start | Governor Mode 1 | Governor Mode 2 | ||||
Motor Rotation | Forward | Reverse | |||||||
Start Up Strength | 10% | 15% | 20% | 25% | 30% | 35% | 40% | 45% | 50% |
Low Voltage Cut Off Type | Reduce Power | Cut Off Power |